Step 1: this is how your vinyl will look when you receive it. Make sure your surface is clean and dry.
Step 2: Rub the product with a hard, flat surface, such as a credit card, to make sure the vinyl is sticking to the application tape.
Step 3: Peel away the application tape (the sticky paper), so the vinyl adheres top it and away from the backing (the plastic coated paper.)
Step 4: Place the vinyl in your desired area. When on a wall, you’ll be able to stick the sides down and shift it if needed. On a glass surface, be careful because once it is stuck, it is stuck!
Step 5: Rub aggressively with a credit card until you feel the vinyl has stuck to the surface.
Step 6: Slowly pull back the tape so you are dragging it onto itself, so as not to pull the letters. If the vinyl pulls off the surface, just lay the tape back on the letter and rub a little more with the credit card.
Step 7: Your vinyl is now applied!
Step 8: To remove, simply pick off. If you are having trouble, warm the vinyl using a hair drier and the vinyl will soften, making it easier to remove.
